Premium Mineral 15W-40 Everyday Engine Oil (PM15W40)
Nulon Premium Mineral 15W-40 Everyday Engine Oil is formulated with virgin mineral base oils and high-performance additives which provide optimum performance and protection to most late model engines.
Nulon Premium Mineral 15W-40 Everyday Engine Oil promotes easier cold starting, reduces wear and keeps the engine clean between the recommended oil drain intervals.
For increased performance and protection use Nulon Semi Synthetic 15W-40 Modern Everyday Engine Oil (Part No. ME15W40).
Pack sizes
- Maintains viscosity at high temperature
- Anti-wear protection to extend the life of the engine
- Enhanced detergency to clean and prevent sludge formation
- Contains anti-oxidants to prolong the life of the oil between drain intervals
- Faster oil flow improves cold starting
- Safe for catalytic converters
- Suitable as a running-in oil
NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubricant requirements and service intervals.
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
Typical Characteristics
| SAE Viscosity Grade | 15W-40 |
| Viscosity @ 100°C (cSt) ASTM D445 | 15.09 |
| Viscosity @ 40°C (cSt) ASTM D445 | 121.6 |
| Apparent Viscosity by CCS @ -20°C (cP) ASTM D5293 | 5950 |
| Apparent Viscosity by MRV @ -25°C (cP) ASTM D4684 | 24700 |
| Viscosity Index ASTM D2270 | 128 |
| Density @ 15°C (kg/L) ASTM D4052 | 0.8753 |
| Sulphated Ash (mass %) ASTM D874 | 0.8 |
| Total Base Number (mg KOH/g) ASTM D2896 | 6 |
| Flash Point (°C) ASTM D92 | 227 |
Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.